Fracarro OPT-TX DT optischer Umsetzer/Sender (SC/APC - 4 Sat Eingänge - 1310nm Version)
Verfasst: 8. Oktober 2021 15:22
FRACARRO OPT-TX DT Fibre Optic Transmitter (optischer Umsetzer 1310nm Version)
Shoplink
Hinweis: Quattro-LNB auf optischer Umsetzer (SC/APC Anschlüsse), Ausgang tauglich für Jultec JOL0102-90A (Gen2) für eine Breitband-Zuführung auf Jultec JPS/JRS Multischalter.
The Fracarro Home Fibre range is a highly innovative solution, designed for its simplicity of installation from the head end to the wall SPAMMER.
The system uses a conventional LNB and dish assembly requiring no special optical alignment tools. It is capable of carrying all satellite and terrestrial signals through a single 9/125 glass fibre. Additional transmitters can be cascaded using a standard 5 core co-axial back bone giving greater flexibility in system design to supply a large number of outlets.
RELIABILITY
Enables the transfer of signals without loss or degradation over long distances (attenuation 0.3dB/Km)
Immune to electrical and environmental interferences and is therefore ideally suited for those particularly difficult installations
FLEXIBILITY
Enables complex systems with a high number of outlets to be designed easily (1 TX for 128 outlets)
Compatible integration with existing coax systems
Cascadeable distribution typical of multiswitch topography (tree & branch or star wired)
EASE OF INSTALLATION
Simplifies cabling due to the extremely small cables and connectors (only 3mm)
Use of traditional dish and LNB array
No specialised optical alignment equipment required
The 5mW optical transmitter works in the second optical transmission window (1310nm) and manages the SAT signals – from a traditional LNB and dish combination – including full bandwidth DTT.
Equipped with automatic gain control (AGC), up to a maximum of 7 transmitters can easily be connected together using the typical cascade distribution infrastructure, serving up to 896 wall outlets per trunk.
RF Inputs: 5 (4 SAT + 1TERR)
RF Outputs: 7 (4 SAT + 1TERR + 2TEST)
Optical output: 1 SC/APC
SAT Input
Bandwidth MHz: 950 – 2150
Connectors type: F Female
Input Return loss dB: 10
Trunk line insertion loss dB: <2
Input Level dBuV: 69 – 86
TV Input
Bandwidth MHz: 87 – 862
Connectors type: F Female
Input Return loss dB: 10
Trunk line insertion loss dB: 1
Input Level dBuV: 80@10ch
Test outputs
Bandwidth MHz: 87 – 862 / 950 – 2150
Connectors type: F Female
Input Return loss dB: 10
Test signal level dBuV: 59
Optical output
Connectors type: SC/APC
Wavelength nm: 1310
Optical power dBm: 8 (5mW)
Optical return loss dB: >45
Safety class: 1M
MAIN FEATURES
Mains Vac/Hz: 184 – 264 / 50 – 60
Power SPAMMER: 15W
LNB remote feeding mA: 200@14V (4 SAT connectors)
Operating temperature °C: -5 to +55
AGC Dynamics: 20dB
Hersteller: Fracarro
Typ: OPT-TX DT 1310nm
EAN: 8016978091829
Shoplink
Hinweis: Quattro-LNB auf optischer Umsetzer (SC/APC Anschlüsse), Ausgang tauglich für Jultec JOL0102-90A (Gen2) für eine Breitband-Zuführung auf Jultec JPS/JRS Multischalter.
The Fracarro Home Fibre range is a highly innovative solution, designed for its simplicity of installation from the head end to the wall SPAMMER.
The system uses a conventional LNB and dish assembly requiring no special optical alignment tools. It is capable of carrying all satellite and terrestrial signals through a single 9/125 glass fibre. Additional transmitters can be cascaded using a standard 5 core co-axial back bone giving greater flexibility in system design to supply a large number of outlets.
RELIABILITY
Enables the transfer of signals without loss or degradation over long distances (attenuation 0.3dB/Km)
Immune to electrical and environmental interferences and is therefore ideally suited for those particularly difficult installations
FLEXIBILITY
Enables complex systems with a high number of outlets to be designed easily (1 TX for 128 outlets)
Compatible integration with existing coax systems
Cascadeable distribution typical of multiswitch topography (tree & branch or star wired)
EASE OF INSTALLATION
Simplifies cabling due to the extremely small cables and connectors (only 3mm)
Use of traditional dish and LNB array
No specialised optical alignment equipment required
The 5mW optical transmitter works in the second optical transmission window (1310nm) and manages the SAT signals – from a traditional LNB and dish combination – including full bandwidth DTT.
Equipped with automatic gain control (AGC), up to a maximum of 7 transmitters can easily be connected together using the typical cascade distribution infrastructure, serving up to 896 wall outlets per trunk.
RF Inputs: 5 (4 SAT + 1TERR)
RF Outputs: 7 (4 SAT + 1TERR + 2TEST)
Optical output: 1 SC/APC
SAT Input
Bandwidth MHz: 950 – 2150
Connectors type: F Female
Input Return loss dB: 10
Trunk line insertion loss dB: <2
Input Level dBuV: 69 – 86
TV Input
Bandwidth MHz: 87 – 862
Connectors type: F Female
Input Return loss dB: 10
Trunk line insertion loss dB: 1
Input Level dBuV: 80@10ch
Test outputs
Bandwidth MHz: 87 – 862 / 950 – 2150
Connectors type: F Female
Input Return loss dB: 10
Test signal level dBuV: 59
Optical output
Connectors type: SC/APC
Wavelength nm: 1310
Optical power dBm: 8 (5mW)
Optical return loss dB: >45
Safety class: 1M
MAIN FEATURES
Mains Vac/Hz: 184 – 264 / 50 – 60
Power SPAMMER: 15W
LNB remote feeding mA: 200@14V (4 SAT connectors)
Operating temperature °C: -5 to +55
AGC Dynamics: 20dB
Hersteller: Fracarro
Typ: OPT-TX DT 1310nm
EAN: 8016978091829